Please wait while the page loads...

Check Engine Light Service Land Rover LR3

What do you do when you’re driving along in your Land Rover LR3 and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Land Rover owners, your heart sinks a microscopic because you have microscopic idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the estimate of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your Land Rover LR3 checked as soon as likely. Ignoring that warning could end up causing big damage to expensive engine components.

When your Land Rover LR3's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t contractual, a computer turns on your check engine light. This amber or yellow light is commonly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic inspect tool that is used by our Land Rover auto repair mechanics at Land Rover of Greenville. There are also a number of relatively bargain code readers that are designed for do-it-yourselfers, should you designate that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced experienced to learn the issue and repair it.

How many miles can you drive with the check engine light?

If you check engine light is shining, we recommend that you pull over and contact Land Rover of Greenville to help find out if your vehicle is safe to drive in or if we recommend a tow truck. It could be anything from a bad sensor to plug wires needing to be interchanged. Since each check engine code has its own level of severity, it is difficult to predict how copious miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy properly.

Land Rover LR3 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that slight light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear impartial away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your LR3. There are hundreds of correct codes that your check engine light can represent. While that sounds daunting, with a slight patience, tackling basic diagnostics will give you chummy knowledge about your automobile and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, visible and big automobile symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of amiable OBD codes, there are also hundreds of amiable reasons for the light, including:

  • Loose Gas Cap or Missing Gas Cap
  • Fuel and air metering systems problems
  • Emissions controls issues
  • O2 Sensor
  • Computer output circuit issues
  • Bad Spark Plugs
  • Ignition system faults
  • Old Battery
  • Transmission issues

This is why it is lanky for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Land Rover of Greenville at 8642077297 today or schedule your check engine light service online today! If the engine light comes on due to a alarming concern, you risk destructive your automobile further by not repairing the issue prudent away. When your check engine light comes on, you should get it checked out promptly by a certified Land Rover technician.

Land Rover LR3 Check Engine Light Flashing

Although there are many potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are a lot commonplace causes including something as plain as a loose gas cap. Substitute commonplace reasons for a Check Engine Light are a malfunction with the fuel injection system, faulty head gasket, damaged oxygen sensor, dirty mass airflow sensor, faulty emissions control part, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Land Rover Certified Technicians and the certified service protocol to isolate the root problem and repair it as essential to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Land Rover issue was fixed.

Every Land Rover LR3 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its hard systems. The sensors are frequently detecting conditions while sending data to the electronic control company. If the electronic control company detects that the data is out of factory specifications, the Check Engine Light flashes telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Land Rover of Greenville provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Remarkably Qualified Service professional.

Land Rover LR3 Check Engine Light

A flashing light indicates that the problem is serious and if not taken care of suddenly may result in heavy damage to the vehicle. If the check engine light in your Land Rover LR3 starts flashing, that means that the problem needs hasty attention and your Land Rover should be brought in suddenly. This shining light usually indicates a rigorous engine misfire allowing unburned fuel to be deposited into the exhaust system. There it can rapidly enhance the temperature of the catalytic converter to a point where damage is feasible, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can explicitly be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a notably expensive repair. If your check engine light is flashing, please contact our squad of automotive advisors at Land Rover of Greenville immediately by calling 8642077297.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not accordingly tightened to a more serious failure like a harmful catalytic converter or a problem with one of the car's oxygen sensors, so it fantastic to get the handy code reading and diagnosis. The average cost for a check engine light diagnosis & testing is customarily between $88 and $111. The fantastic news, Land Rover of Greenville offers complimentary multi-point inspections and free diagnostics, in most cases, to help designate the cause of your check engine light.

What Does the Check Engine Light Mean?

One of the most consistently misunderstood lights or indicators in your Land Rover LR3 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in countless distinct ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light brightens in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a range of things for your Land Rover LR3. Some of these include controlling engine speed, ignition timing, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can mean a differ of chance things. It can be as uncomplicated as your gas cap being loose or as unhealthy as engine knocking. If your check engine light is on in your Land Rover LR3, contact Land Rover of Greenville. Our Land Rover service department can help you learn what code is turning your check engine light on or diagnose why your check engine light is blinking. Contact Land Rover of Greenville today!

Will the check engine light reset itself?

The check engine light on your Land Rover LR3 will consistently shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your Land Rover LR3 light will go off after about 20-40 miles. If you commute over that amount and the light is still on, you will need to bring it in to Land Rover of Greenville so the light and code can be double-checked and reset.

What could cause the check engine light to come on in a Land Rover LR3?

When your check engine light comes on, this could be as pure as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a hazardous problem that could cause hazardous wear and tear to your engine and come with a grand repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow commonly means something less hazardous but a glaring check engine light expresses that your vehicle’s engine is in hazardous trouble and service is needed immediately. If your check engine light is glaring in your Land Rover LR3, we highly recommend not to drive the vehicle and schedule Land Rover service today. Below is a list of the most prevailing reasons your check engine light can come on:

  • Your O2 Sensor (Oxygen Sensor) needs to be replenished. The Oxygen sensor, common as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less persistent when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your Land Rover LR3's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to designate the legitimate mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or further item can wreak havoc on your Land Rover LR3 if it’s not installed accurately. These aftermarket parts and accessories can eject the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound deliberate, bring your LR3 to Land Rover and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, exceedingly aftermarket parts and accessories, or using OEM parts initial place might cost a miniature bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your Land Rover LR3’s exhaust system. The catalytic converter's work is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is generally caused by neglected maintenance, which is why Land Rover of Greenville offers a complimentary multi-point inspection with every Land Rover service. If you have an issue with your catalytic converter and don't get it repaired, your Land Rover LR3 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause further problems from overheating.
  • One of the most common and countless cause is that your Land Rover LR3 gas cap is loose, damaged or missing. The gas cap for your Land Rover LR3 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't costly. If your check engine light turns on suddenly after you put gas in your Land Rover LR3, initial thing you should check is to make satisfied the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • The battery is scanty or dead. The battery in your Land Rover LR3 is every decisive. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did several decades ago, and they don't solely require maintenance. The price of a new one depends on the type of Land Rover you drive, but check our present service coupons and specials.
  • Your Land Rover LR3 has a vacuum leak. Every Land Rover LR3 has a vacuum system that performs a wide assortment of functions. The vacuum system also helps cut down detrimental emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, exceedingly if they’re exposed to profound heat or extreme cheerful.
  • Your mass airflow sensor (known as MAF) needs to be replenished. The mass airflow sensor in your Land Rover LR3 is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to apparent changes, like altitude. If your Land Rover LR3 is having trouble starting, idling rough or has a precipitous change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • New Spark Plugs or Plug Wires are needed for your Land Rover LR3. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, central to more costly repairs.

Is it safe to drive your Land Rover LR3 with the check engine light on?

This question is not exceptionally uncomplicated because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is mostly indicated by a consistent glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more strict problem. If the check engine light is twinkling, this means that there is a strict issue and it is recommended to service your Land Rover LR3 suddenly. Call the experts at Land Rover of Greenville by dialing 8642077297 so you can describe the issues. Or reduce your speed and bring your Land Rover to our certified mechanics as soon as achievable.